The short answer
The Rapala Fillet Glove is a single steel-blend knit that fits either hand; the KastKing Kut Safe Fillet Gloves are a rubber-palm knit KastKing rates ANSI level 6; and the Schwer PM5201 Chainmail Glove is stainless steel rings Schwer rates ANSI A9.
Our verdict
Fish Cleaning Glove Top Picks
A fillet glove guards the hand holding the fish from the knife, fins and gill plates. Each of these nine is tied to cleaning fish by its maker or a named guide; cut ratings are printed as the maker states them. More kit: our fishing gear guides.
Glove finder
Find a glove for cleaning fish
Pick the job and a price tier. The suggestion is our editorial starting point among the nine gloves below, drawn from the maker and source quotes in each review, not a test result.
Compare the picks
Compare the 9 Fish Cleaning Gloves
Rapala Fillet GloveSteel-Blend Knit GloveFilletingNot published$25.47 Prime
Evidence: Trout and Steelhead fillet-glove roundup; size not stated, no hands-on test claimed
Fish Monkey GripperLatex-Palm Fillet GloveFilleting, fins and gillsANSI 5$14.99
Evidence: Trout and Steelhead fillet-glove roundup; size not stated, no hands-on test claimed
KastKing Kut SafeRubber-Palm Fillet KnitFilletingANSI level 6$15.99 Prime
Evidence: maker specs only, no independent test
Rock Fish FP3703Latex-Grip A4 PairFilleting, food prepA4$12.08 Prime
Evidence: maker specs only, no independent test
Smith's Slab SlangerHPPE Knit PairFilleting, food prepCut level 5$14.70 Prime
Evidence: maker specs only, no independent test
Dowellife GlovesEN 388-Rated Knit PairFood prep, filletingListing: EN 388:2016 level C$9.99
Evidence: listing specs only, no independent test; Trout and Steelhead's fibre list differs from the listing
Lindy Handling GloveSuperFabric Single GloveFins and gillsNot published
Evidence: Trout and Steelhead guide's own glove; size and hand not stated
BUBBA Fillet GlovesKevlar-Blend Fillet PairFilleting, fins and gillsNot published$39.90
Evidence: maker specs only, no independent test
Schwer PM5201Stainless Chainmail GloveFilleting, food prepANSI A9$42.99
Evidence: maker specs only; Trout and Steelhead names a Schwer A9 mesh glove without the model number
How We Chose Gloves for the Fillet Table
How this guide was built
built from manufacturer documentation, published third-party reviews and owner reports; we have not tested these products ourselves.
What each glove had to show
- A fish tie from the maker or a named guide.
- A cut-resistance claim, rating quoted or “not published”.
- The exact Amazon listing, checked for size, stock and seller.
Sources and two Reddit threads
Sources and two Reddit threads
Trout and Steelhead, a guide-run site that sells no gloves, covers five of these brands in its fillet glove guide and the Lindy in its handling glove guide. Everything else is maker or listing copy.
In an r/BuyItForLife fish cleaning gloves thread, a poster writes that “Chainmail gloves are very good against cuts, but bad against the stabbing of fin rays.” On r/kayakfishing (see our ocean fishing kayak guide), a poster adds that Kevlar “is still nothing against a good fillet knife.”
Fish Cleaning Gloves: Detailed Reviews
Rapala Fillet Glove, Steel-Blend Knit Glove
Anglers who want one sized glove on the hand that holds the fish.
$25.47 from AmazonAs of Nov 18, 20:56 UTCVerdict
One knit glove that fits either hand, from Rapala.
Evidence: Independently reviewed, same series. Trout and Steelhead: Rapala Fillet Glove, size not stated.
Rapala describes “Tuff-Knit yarn, a comfy blend of natural and synthetic fibers with stainless steel,” machine washable. It publishes no cut level.
Specs (linked: BPFGL, Large)
Pros
- Stainless steel in the knit, per Rapala
- Small, Medium and Large
Cons
- No published cut rating
- Knife hand stays bare
- Cut rating: not published
- Sold as: single glove, either hand (Rapala)
- Price tier: $$
Fish Monkey Gripper Fillet Glove, Latex-Palm Fillet Glove
Verdict
A synthetic knit with a wrinkled latex palm, rated ANSI 5 by Fish Monkey.
Evidence: Independently reviewed, same series. Trout and Steelhead: Fish Monkey Gripper fillet glove, size not stated.
Fish Monkey says it “Safeguards hands from sharp knives, fins, and gill plates during filleting.” Sold by The Kingfisher on Amazon at writing.
Specs (linked: FM13, L/XL)
Pros
- Textured latex palm for slimy fish, per Fish Monkey
- Machine washable, per Fish Monkey
Cons
- One size, L/XL
- Single or pair not stated
- Cut rating: ANSI 5 (Fish Monkey; edition not named)
- Sold as: not stated
- Price tier: $
KastKing Kut Safe Fillet Gloves, Rubber-Palm Fillet Knit
Verdict
An HPPE and metal wire knit with rubber palm and fingers, rated ANSI level 6 by KastKing.
Evidence: No independent test; maker specs. Source: KastKing.
KastKing says it is “Designed specifically for filleting fish,” in M to 2XL. Against the Fish Monkey: four sizes, but no independent coverage. Sold by KastKing USA on Amazon at writing.
Specs (linked: Gray, Large)
Pros
- HPPE and metal wire knit, per KastKing
- Four sizes
Cons
- Maker evidence only
- Listing gives conflicting care
- Cut rating: ANSI level 6 (KastKing; edition not named)
- Sold as: not stated
- Price tier: $$
Rock Fish Fish Fillet-er FP3703, Latex-Grip A4 Pair
Verdict
A budget A4 pair with a latex grip.
Evidence: No independent test; maker specs. Source: Cordova Safety (Rock Fish).
Cordova Safety calls it “ideal for prepping fish” and lists “A4 Cut”; the Amazon listing says “ANSI A4 Certified.”
Specs (linked: Green, Large)
Pros
- Rated by a work-glove maker
- Covers both hands
Cons
- Contains latex, per Cordova
- Maker evidence only
- Cut rating: A4 (Cordova)
- Sold as: one pair (per the Amazon listing)
- Price tier: $
Smith’s Mr. Crappie Slab Slanger Gloves, HPPE Knit Pair
Verdict
An HPPE pair Smith’s calls food grade.
Evidence: No independent test; maker specs. Source: Smith’s.
Smith’s says the HPPE “prevents cuts from gills, fillet knives, and hooks” and calls it “5 level food-grade material,” naming no standard.
Specs (linked: 51367, XL)
Pros
- Food-grade HPPE, per Smith’s
- Machine washable
Cons
- XL only
- Standard behind “level 5” not named
- Cut rating: cut level 5 (Smith’s; standard not named)
- Sold as: one pair, XL only (Smith’s)
- Price tier: $$
Dowellife Cut Resistant Gloves, EN 388-Rated Knit Pair
Verdict
A low-cost pair the listing calls food grade, with a listed EN 388 rating.
Evidence: No independent test; maker specs. Source: Dowellife Amazon listing.
The listing claims “EN388:2016 Level C” and lists HPPE, polyester and stainless steel wire; Trout and Steelhead describes “a blend of polyethylene, fiberglass, and spandex.” Sold by Dowellife on Amazon at writing.
Specs (linked: Original, Large, Pack of 1)
Pros
- Names its EN 388 edition and level
- Machine washable
Cons
- No maker site found
- Fibre blend differs between sources
- Cut rating: EN 388:2016 level C (per the Amazon listing)
- Sold as: one pair (per the Amazon listing)
- Price tier: $
Lindy Fish Handling Glove, SuperFabric Single Glove
Pike and musky anglers who want one glove for boat and table.
View on AmazonVerdict
A right- or left-hand SuperFabric glove for handling and filleting.
Evidence: Independently reviewed, same series. Trout and Steelhead: Lindy Fish Handling Glove, size and hand not stated.
Lindy says to use it “when unhooking, filleting, and removing fish from livewells.” Trout and Steelhead’s guide, Graham Bristow, favours it for toothy fish: “The fish-handling gloves clean easily and don’t hold fish odors.”
Specs (linked: AC951, right hand, L/XL)
Pros
- For handling as well as filleting, per Lindy
- Velcro wrist strap
Cons
- No published cut level
- Hand-specific
- Cut rating: not published (SuperFabric, per Lindy)
- Sold as: single glove, right or left (Lindy)
- Price tier: $$
BUBBA Ultimate Fillet Gloves, Kevlar-Blend Fillet Pair
Anglers who want a sized pair with touch-screen fingertips (catfish anglers: our catfish bait guide).
$39.90 from AmazonAs of Nov 18, 20:56 UTCVerdict
A premium pair with a SuperFabric palm and touch-screen fingertips.
Evidence: No independent test; maker specs. Source: BUBBA.
BUBBA cites “cut and puncture-resistant materials to protect your fingers from those nicks and fins” and “15% DuPont Kevlar Fiber. Sold in pairs.” Sold by Baits Fishing Company on Amazon at writing.
Specs (linked: 1099916, Medium)
Pros
- Double-layer SuperFabric palm, per BUBBA
- Touch-screen index finger and thumb
Cons
- No published cut level
- Hand wash only, per the listing
Who should buy it
Anglers who want a sized pair with touch-screen fingertips (catfish anglers: our catfish bait guide).
- Cut rating: not published
- Sold as: pair (BUBBA)
- Price tier: $$$
Schwer PM5201 Chainmail Glove, Stainless Chainmail Glove
Anglers who want steel rings, not a knit, on the fish hand.
$42.99 from AmazonAs of Nov 18, 20:56 UTCVerdict
Welded 316L steel rings rated ANSI A9 by Schwer.
Evidence: No independent test; maker specs. Source: Schwer.
Schwer says it is “certified to ANSI A9 (the highest level)” and “Ideal for meat, fish, and poultry processing.” Trout and Steelhead recommends an unnamed Schwer A9 mesh glove.
Specs (linked: PM5201, Large, 1 Pack)
Pros
- Top of ANSI’s nine-level scale
- Food-grade steel, per Schwer
Cons
- Chainmail is weak against fin rays, per one r/BuyItForLife poster (not on this model)
- Single glove
- Cut rating: ANSI A9 (Schwer)
- Sold as: single glove, reversible (Schwer)
- Price tier: $$$
Choosing a Fillet Glove
Reading an ANSI cut level and other ratings
ANSI says ANSI/ISEA 105 “uses a 9-level scale (A1-A9) to indicate how well a glove can withstand a blade cut.” Makers here also print “ANSI 5”, “ANSI level 6”, an unnamed “level 5” or an EN 388 letter. For food-safe use, Smith’s and Schwer call their materials food grade, and the Dowellife listing says “Food Safe.”
Frequently Asked Questions
Q. What are the best gloves for handling fish?
Trout and Steelhead’s guide picks the Lindy for toothy fish; for sun gloves, see our gloves for fly fishing.
Q. Should you wear gloves to handle fish?
Trout and Steelhead says cotton gloves harm released fish: “Only use them if you plan to keep the fish to eat.” A r/kayakfishing poster agrees.
Q. Are fish cutting gloves waterproof?
No maker here says so; the Lindy listing says water resistant.
The bottom line
Final Verdict
One glove for the fish hand: the Rapala Fillet Glove (check price). A rubber-palm knit rated ANSI level 6 by KastKing: the KastKing Kut Safe Fillet Gloves (check price). ANSI A9 steel rings: the Schwer PM5201 Chainmail Glove (check price). Budget pairs: the Rock Fish Fish Fillet-er FP3703 (check price) (latex grip, A4) and Dowellife Cut Resistant Gloves (check price) (listing EN 388 level C); an XL pair Smith’s calls food grade: the Smith’s Mr. Crappie Slab Slanger Gloves (check price); a latex palm: the Fish Monkey Gripper Fillet Glove (check price). Toothy fish: the Lindy Fish Handling Glove (check price); touch-screen fingertips: the BUBBA Ultimate Fillet Gloves (check price).
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
